Aalborg Vortex User Manual
Page 74
69
8. TROUBLESHOOTING
8.1 Common Conditions
Your Vortex Flow Meter was thoroughly checked at numerous quality control
points during and after manufacturing and assembly operations. It was calibrated
according to your desired flow and pressure conditions for a given fluid. It was
carefully packed to prevent damage during shipment. Should you feel that the
instrument is not functioning properly, please check for the following common
conditions first:
Are all cables connected correctly?
Are there any leaks in the installation?
Is the power supply correctly selected according to requirements?
When several meters are used a power supply with appropriate current rating
should be selected. Were the connector pinouts matched properly?
When interchanging with other manufacturers' equipment, cables and connec-
tors must be carefully wired for correct pin configuration.