Aga Ranges Berrington - Manual (Page 11)

LIGHTING
1. Before lighting the stove, ensure that any build up of ashes in the
fire box has been removed and that the ashpan has been emptied.
2. Open the firebox and cover the grate with crumpled pieces of paper.
3. Lay pieces of kindling on top of the paper towards the back of the
fire box.
4. Open the primary air inlet by turning the control knob to setting 4.
5. Open the secondary air control by sliding the control lever located
over the top of the fire door to the right. (See Fig.11).
6. Ignite the paper and close the firedoor.
7. When the kindling is well alight, open the fire door and add more
kindling of a larger size to sustain the fire. Close the firedoor. Do
not operate this appliance with the firedoor open.
8. Never use inflammable liquid i.e. gasoline, petrol paraffin etc. to
start or freshen up a fire in this heater.
9. When a hot bed of fuel is established, add the normal fuel load and
adjust the air controls to the required setting.
10. When re-fuelling open the firedoor and reload, close the firedoor.
11. To shut the fire down, do not add fuel, make sure that the firedoor
is properly closed and that the primary and secondary air controls
are all in the closed position. Cutting off the air supply will reduce
the heat output.
This appliance is hot whilst in operation.
Keep children, clothing and furniture a safe distance away.
10