Axis Communications AXIS 225FD - Manual (Page 2)

AXIS COMMUNICATIONS <Product Name> Quick User’s Guide
2
About this Document
This manual is intended for administrators and users of the AXIS
225FD Fixed Dome Network Camera, and is applicable for software
release 4.45. It includes instructions for using and managing the AXIS
225FD on your network. Previous experience of networking will be of
use when using this product. Some knowledge of UNIX or
Linux-based systems may also be beneficial, for developing shell
scripts and applications. Later versions of this document will be posted
to the Axis Website, as required. See also the product’s online help,
available via the Web-based interface.
Safety Notices Used In This Manual
Caution! - Indicates a potential hazard that can damage the product.
Important! - Indicates a hazard that can seriously impair operation.
Do not proceed beyond any of the above notices until you have fully
understood the implications.
Intellectual Property Rights
Axis AB has intellectual property rights relating to technology
embodied in the product described in this document. In particular, and
without limitation, these intellectual property rights may include one
or more of the patents listed at http://www.axis.com/patent.htm and
one or more additional patents or pending patent applications in the
US and other countries.
This product contains source code copyright Apple Computer, Inc.,
under the terms of Apple Public Source License 2.0 (see
http://www.opensource.apple.com/apsl/).
The source code is available from:
http://developer.apple.com/darwin/projects/rendezvous/
Legal Considerations
Video surveillance can be prohibited by laws that vary from country
to country. Check the laws in your local region before using this
product for surveillance purposes.
Electromagnetic Compatibility (EMC)
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Re-orient or
relocate the receiving antenna. Increase the separation between the
equipment and receiver. Connect the equipment to an outlet on a
different circuit to the receiver. Consult your dealer or an experienced
radio/TV technician for help. Shielded (STP) network cables must be
used with this unit to ensure compliance with EMC standards.
USA - This equipment has been tested and found to comply with the
limits for a Class B computing device pursuant to Subpart B of Part 15
of FCC rules, which are designed to provide reasonable protection
against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely
to cause interference, in which case the user at his/her own expense
will be required to take whatever measures may be required to correct
the interference.
Canada - This Class B digital apparatus complies with Canadian
ICES-003.
Europe - This digital equipment fulfills the requirements for
radiated emission according to limit B of EN55022/1994, and the
requirements for immunity according to EN55024/1998 residential,
commercial, and industry.
Japan - This is a class B product based on the standard of the
Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or television
receiver in a domestic environment, it may cause radio interference.
Install and use the equipment according to the instruction manual.
Australia - This electronic device meets the requirements of the
Radio communications (Electromagnetic Compatibility) Standard 1998
AS/NZS 3548.
Liability
Every care has been taken in the preparation of this manual. Please
inform your local Axis office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material contained
within this document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose.
Axis Communications AB shall not be liable nor responsible for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
Trademark Acknowledgments
Ethernet, Internet Explorer, Linux, Microsoft, Mozilla, OS/2, UNIX,
Wfine, Windows, WWW are registered trademarks of the respective
holders. Java and all Java-based trademarks and logos are trademarks
or registered trademarks of Sun Microsystems, Inc. in the United
States and other countries. Axis Communications AB is independent
of Sun Microsystems Inc. UPnP TM is a certification mark of the
UPnP TM Implementers Corporation.
Support
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your
reseller will forward your queries through the appropriate channels to
ensure a rapid response. If you are connected to the Internet, you can:
• download user documentation and firmware updates
• find answers to resolved problems in the FAQ database. Search by
product, category, or phrases
• report problems to Axis support by logging in to your private
support area
• visit Axis Support at www.axis.com/techsup/
Safety Notice - Battery Replacement
The AXIS 225FD uses a 3.0V CR2032 Lithium battery as the power
supply for its internal real-time clock (RTC). Under normal conditions
this battery will last for a minimum of 5 years. Low battery power
affects the operation of the RTC, causing it to reset at every power-up.
A log message will appear when the battery needs replacing.
The battery should not be replaced unless required!
If the battery does need replacing, please observe the following:
• Danger of Explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent battery, as recommended
by the manufacturer.
• Dispose of used batteries according to the manufacturer's
instructions.
AXIS 225FD Fixed Dome Network Camera User’s Manual
Revision 2.3
Dated September 2008
Part No: 32819
Copyright© Axis Communications AB, 2005 - 2008