Akai LCT3785TA - Manual (Page 16)

15
Red White
 Connecting the DVD or VCR player devices
Switch off TV and external equipment before connecting cables.
1. Connect a DVD or VCR player’s Video Out to the TV’s Video In terminal by a Video cable.
2. Connect a DVD or VCR player’s S-VIDEO Out to the TV’s S-VIDEO In terminal by a S-VIDEO
cable.
3. Connect a DVD or VCR player’s Audio Out to the TV’s L/R terminal by a Audio cable.
4. Press Power to turn on the TV, then turn on external equipment.
5. Press Source to select AV or S-VIDEO signal source.
Red
Yellow
White
DVD or VCR player
DVD player
DVD or VCR player
 Connecting SPDIF(Optical) terminal to a
stereo amplifier
Switch off TV and external equipment before con-
necting cables.
1. Connect one end of an optical cable to the
TV Digital Audio (Optical) Output port.
2. Connect the other end of the optical cable
to the digital audio (Optical) input on the
audio equipment.
3. Press Power to turn on the TV, then turn on
external equipment.
Note:
1. When connecting the TV to external audio
devices, such as amplifiers and speakers,
please be sure to turn the TV speakers off.
2. Only for DTV.
Caution:
Do not look into the optical output port. Looking
at the laser beam may damage your vision.