Akai LCT3785TA - Manual (Page 20)

19
To display a picture from an external source in the PIP/PBP window:
1. Connect the external source equipment. (refer to Connect Accessory Devices page.)
2. Select the TV program you want to watch.
3. Press PIP to display the PIP/PBP window.
4. Repeatedly press Source to select the input source for the PIP/PBP window.
To change the PIP position:
Press PIP Pos. button to change the PIP
window position under PIP mode, it display
as following;
Swap the pictures:
When in Basic PIP mode, press “Swap” button
to swap main or sub pictures; When in L/R
window mode, press “Swap” button to swap the
L/R pictures.
To change Main or Sub sound:
When the red frame is displaying in main
window, the sound goes out of main window
source. If it display in sub window, the sound
goes out of sub window source.
Left Up
Left Down Right Down
Right Up
Middle
Swap
PIP Pos.
Enter
TV DTV AV/S-Video YPbPr1 YPbPr2 VGA HDMI
TV     
DTV     
AV/S-Video     
YPbPr1    
YPbPr2    
VGA    
HDMI     
PIP/PBP
Main
PIP Settings
 : PIP and Swap Operate
: PIP doesn’t Operate
Right
Down
Left
Down
Left
Up
Right
Up
Middle