Akai LCT3785TA - Manual (Page 33)

32
Select Back Adjust
Tuner Mode
Searching
Press Enter
TV
Channel Skip
Channel Name
On
Press Enter
Video
Cable
TV
55
Select Exit Enter ENTER MENU
Using the “Channel Name”
Press Menu button, and then press  or
 button until the “TV” menu appears.
Press  or  button to highlight the
item.
Press Enter button to confirm, it will
display “Channel Name” list.
Use , ,  or  button for select, and
move cursor to “OK”, the press Enter
button for confirm you selection. If you
want to cancel this operation, move
cursor to “Cancel” and press Enter button
for close this setting.
Press Menu or Exit button to return.
Note: It will be invalid if the current source is not
TV.
Selecting Channel
Press CH +/- button on the remote control to search the channels, the channel numbers will
increase or decrease by 1 for each pressing excluding the skipped channels.
Press number buttons 0~9 to select the corresponding channel content. If the channel
number is bigger than 9, just press the two number buttons successively. If the channel
number is bigger than 100, just press the three number buttons successively. The time
interval should not exceed 2 seconds.
If the channel number you pressed is bigger than the maximum channel number that the
setting is permitted, the maximum numbered channel content will be remained.
Channel Preview
Press Recall button to switch between present channel and previous channel. (Only for DTV or
TV input source.)
Hot keys:
-
You can also press Recall button on the remote control.
TV OPERATIONS ---- TV MENU ---- GEOMETRIC MENU