Akai LCT3785TA - Manual (Page 17)

16
 Connect to antenna
ATSC (DTV) & NTSC input connection config
1. There are two Antennas:
- ANT 1 is only for ATSC channel of Air.
- ANT 2 is only for Air or Cable Signal of NTSC.
2. The user can select the Antenna input as below:
A. One Antenna is for Air signal config.
B. Two Antenna config A
ANT 1 is only for ATSC channel of Air.
ANT 2 is only for Cable signal of NTSC.
C. Two Antenna config B
ANT 1 is only for ATSC channel of Air.
ANT 2 is only for Air or Cable Signal of NTSC.
Air Signal
(NTSC + ATSC)
Air Signal
ATSC
Cable Signal
NTSC
Air Signal
(NTSC + ATSC)
Splitter
Cable Box
ANT 1 (DTV)
ANT 2 (NTSC)
ANT 1 (DTV)
ANT 2 (NTSC)
ANT 1 (DTV)
ANT 2 (NTSC)
Splitter
Cable Signal NTSC
Note: After connection, if your product has the interference, please don’t select the connections A
or C, use only B.
CONNECT ACCESSORY DEVICES BASIC OPERATION