Campbell Scientific Raven110 GPRS/EDGE Digital Cellular Modem - Manual (Page 11)

Raven110 GPRS/EDGE AirLink Cellular Modem
5. Program the Raven110 Modem
The following software is used to program the modem:
AirLink’s Wireless Ace 3G software utility, which is used to configure settings
in the modem and to load the GPRS/EDGE template file. The Wireless Ace
3G utility can be found on the CD included with the modem, or can be
downloaded from AirLink’s website:
www.airlink.com/support .
Campbell Scientific’s “ Raven GPRS/EDGE Template 115200” file for
dataloggers that support 115200 baud (e.g. CR1000), or “Raven GPRS/EDGE
Template 9600” file for dataloggers that support a maximum baud rate of 9600
(e.g. CR10X). The template file configures the modem to be compatible with
CSI dataloggers. The template files are available from Campbell Scientific’s
Website:
www.campbellsci.com/downloads .
5.1 Using Wireless Ace 3G to Configure the Modem
To install Wireless Ace 3G from the AirLink CD, click on the “Wireless ACE
3G” link under “Modem Utilities” and follow the prompts. Once the
application has been installed, it can be run from the Windows Start menu or
from the icon on the desktop.
Connect the Raven to a serial RS232 port on the PC with a direct RS-232
cable. Also connect the antenna, and 12 V power.
Run Wireless Ace 3G to get the following screen:
7