Campbell Scientific Raven110 GPRS/EDGE Digital Cellular Modem - Manual (Page 31)

Appendix C. Configuring the Raven for PPP
Datalogger Settings:
Using the Device Configuration Utility, configure the following setting on the
TCP/IP tab:
• Config Port Used = RS232
• IP Address = 0.0.0.0
• Modem Dial String = PPP
• Modem Dial Response = CONNECT
• User Name and Password are blank
Using the Device Configuration Utility, select the “Net Services” tab. The
“PakBus/TCP Service Port” default is 6785. This is the “Port” number that
will follow the “IP address” for LoggerNet to communicate with the
datalogger.
C-3