Specifications, 1 raven110 specifications – Campbell Scientific Raven110 GPRS/EDGE Digital Cellular Modem User Manual

Page 6

Advertising
background image

Raven110 GPRS/EDGE AirLink Cellular Modem

Point Name (APN), and the device to “Mobile Terminated”, which makes the
modem accessible by LoggerNet over the internet. If Feature Code G821 was
not added when the account was setup, it can be added later. The APN name
must also be programmed into the modem (Section 5.1). See Appendix D for
additional APN information.

AT&T/Cingular will provide a SIMM card for each modem. In some cases the
SIM can be picked up at a local AT&T/Cingular store. The SIMM card must
be installed inside of the modem as described in Appendix B.

AT&T/Cingular can also setup a Custom APN. A Custom APN takes 4-6
weeks to setup and costs about $1000. A Custom APN may offer more
efficient routing and better security than a standard Internet APN, and should
be considered for large cellular phone networks.

3. Specifications

3.1 Raven110 Specifications

AirLink Raven Model G3210 GPRS-EDGE modem

Network: 1900/850 MHz

Transmit Frequency: 1850-1910 MHz and 824-849 MHz

Transmit Power: 1.0 W for 1900 MHz; 2.0 W for 850 MHz

Receiver Frequency: 1930-1990 MHz and 869-894 MHz

Modes Supported: GPRS and SMS

Throughput: up to 40 kbps

RS-232 Data Rates: 1200 bps to 115.2 kbps

Input Voltage: 10 to 28 Vdc

Input Current: 20 to 250 mA

Typical Current Drain at 12 Vdc: 20 mA dormant connection (idle for 10 to 20

seconds), 130 mA transmit/receive

Operating Temperature Range: -30° to +70°C (10% duty cycle limit above

60°C)

Operating Humidity: 5% to 95% non-condensing

Serial Protocols: AT Commands, PPP, SLIP, UDP, TCP

Serial Interface: RS-232

RF Antenna Connector: 50 Ohm TNC

Status LEDs: Power, Channel Acquired, Link Status, Network Registration,

RSSI, Transmit/Receive, Block Errors

Dimensions: 3"W x 1"D x 5.1"L (5.8"L w/connector), 7.6 W x 2.5 D x

13 L cm (14.7 L cm w/connector)

Weight: <1 lb (<0.5 kg)

2

Advertising