Campbell Scientific VisualWeather Software - Manual (Page 18)

VisualWeather
™
Software
6.2 Monitoring Current Conditions
Current weather conditions can be viewed after connecting to a weather
station. Click the Current Conditions button to show the Current Conditions
Screen.
The data displayed will be based upon the sensors that were selected when the
weather station was configured. Custom stations will show only those values
that were set up in the Data Files/Mapping section when configuring the
weather station (see Section 11.2 Real Time Field Mapping). The units used
will be based on the options chosen from VisualWeather’s Tools | Options
menu item.
The data that is displayed is the same as that displayed by Station Data. (See
Section 8 Station Data for more information.) However, when monitoring
current conditions through the connect window, data will only be displayed for
the station to which you are connected. Also, VisualWeather will actively
collect data on a one-second interval to be displayed when monitoring current
conditions. (Data displayed by Station Data must be collected manually or on a
schedule.)
8