Campbell Scientific VisualWeather Software - Manual (Page 20)

VisualWeather
™
Software
table size. A data table can be reset from this window by pressing the Reset
Tables button.
No Table Fill Time statistics will be shown for a CR200 Series
datalogger, because they cannot be calculated for this datalogger
model. NOTES
For the CR10XTD, CR10XPB, CR510TD, CR510PB,
CR23XTD, and CR23XPB, the Time of Fill will not be shown
and you will not have the option to Reset Tables.
Resetting a table will erase the data in the datalogger and in the
data cache.
The Status Table tab lists all of the status table fields in the datalogger along
with their values. By default, all of the fields in the status table are displayed.
To select only certain status data to be viewed, press the Select Fields button.
This will display a list of the status data available in the datalogger. Select one
or more of the fields and then press OK. The current values will be displayed
in the table. If you select a cell within the status table and right click, a short
cut menu will be displayed. From this menu you can view/edit a value (if it is a
writable value).
Press Refresh to prompt VisualWeather to query the datalogger and update the
values again. This refresh option is also available from the right click menu.
Refer to individual datalogger manuals for a list of fields included in the status
table for each datalogger and a description of each.
10