Campbell Scientific Wireless Sensor Network (CWB100, CWS220, and CWS900) - Manual (Page 28)

Wireless Sensor Network
To add the link from the CWB100 to the CWS900, select the CWB100 and
drag the resulting line to the CWS900. Another Add Link Between Stations
dialog box will appear showing the new link. Click the OK button to accept
the link. A new dialog box called Station Link Properties will appear.
The CWS900 Wireless Sensor Interface connects to a variety of sensors. This
dialog box provides options for selecting the measurement type, excitation
voltage, and excitation delay needed for your sensor. Select the CWS900_1
tab at the top of the dialog box.
20