Pro-Lite ArizonaSun - Manual (Page 2)

After the setting of number of characters and color of model, click OK to get into the next
window for message editing. Now you can start your editing with new file.
* The application model for “LM” “LC” and “DCA” is listed below.
LM : Applied for mono-color display with letter “LR”, “LH”, “DR” and “DH” behind the
model number.
LC : Applied for multi-color sign with letter “LC” behind the model number.
DCA : Applied for multi-color sign with letter “DCA” behind the model number.
How to edit the message
When you finish the Model Setting, a new file appears for your editing. Please see the following
figure for the further details with editing screen.
Function Commands, Function Buttons & Editing Commands
Use ukey to choose the
no. of characters, which
conforms to your
display.
Mark the color of
LED, which conforms
to your display.
Editing Commands Function Commands
Click any dot
to light up or
turn off the
any of 8 light
panels for
Provision
model only.
Indicated
with
section
number.
The message is edited
here line by line.
Click to go further the speed. There are five
options available for your selection. They
are Lowest, Low, Middle, High and Highest.
Function Buttons