Pro-Lite ArizonaSun - Manual (Page 3)

z List of Function Commands
To be more attractive, you can have different function commands added into the message for
different display. Just point your mouse to these function command boxes and mark the
desired one for display.
Leading Command:
Shift
＜＜ , Shift ＞＞ , Scroll-U, Scroll-D, Appear, JumpOn, Open ＜＜ , Open ＞＞ , Open-U,
Open-D, Open ＜＞ , Open ＞＜ , Clock, Date, Temp/C and Temp/F .
Tailing Command:
None, Rotate-U, Rotate-D, Scroll-U, Scroll-D, Clear, Pause, Wipe
＜＜ , Wipe ＞＞ , Wipe-U,
Wipe-D, Wipe ＜＞ , Wipe ＞＜ , Clock, Halt, Date, Temp/C and Temp/F.
* Commands Temp/C and Temp/F are available for Outdoor sign only.
z Function Buttons & Editing Commands on Toolbar
z Specify with Function Buttons and Editing Command
Com Port Setting
New: Open a new file.
Open: Opens a saved file.
Save: Saves the edited file.
Cut: Cuts selected text and files to the Clipboard.
Copy: Copies selected text and files to the Clipboard.
Paste: Inserts a copy of the Clipboard contents at the insertion point.
Com Port Setting: Set for transmission parameters (described below).
Transmission: Transmits programmed message to the display (described below).
Timer Setting: Sets timers to display pre-programmed messages in specified time (described below)
About: Records the version of Ssign PC software and copyright.
Fat command: Press Fat command before keying in characters, which you want to enlarge them.
Fls command: Press Fls command before keying in characters, which you want to flash them.
Ins command: to insert the characters
European characters: Press Ext command to get the European characters and mark the one you needed.
Graphics: Press Gra command to get the pre-set graphics and mark the one you desired (described below).