Pro-Lite ArizonaSun - Manual (Page 4)

When you click Com Port Setting from the toolbar, the following window will appear for
Com Port and Baud Rate setting. The Baud Rate should be set the same as your sign.
Transmission
When you click “Transmission” function button from the toolbar, the following window will
appear for necessary information entering.
Note:
If you forget the pre-set 4-digit lock code you set for the sign, you can simply key in
“BBBB” in the ID box to force the sign to accept the message sending without
knowing the pre-set lock code.
Sets for Comport, which should be the same as your PC
Marks the baud rate, which
conforms to your sign.
To save the transmission duration,
you can only send the items you have
modified. But, it is necessary to send
all transmission items (Message,
Timer, Graphic Pattern, Clock and
12H or 24H hour cycle) to the Sign at
the first transmission.
Entering the 4-digit lock code, which
should be the same as the Sign you
are going to send the message to.