Pro-Lite ArizonaSun User Manual
Page 8
Under the ‘Leading’ and “Tailing” option, you also have the choice of Time, Date,
and Temperature (C/F). By placing them before or after the message. See below for
example:
(The time and date is based on the default setting of the ArizonaSun)
Note:
The default time and date can only be set using the remote keyboard. Please refer to
page. 8 on the ArizonaSun User’s Manual.
Setting the timer
The timer is set based on the 24-Hour mode. Remember to check “Enable Timer” to
activate it. Otherwise, it will display the default section. (Section 1)
If at a certain time of the day, you would like to disable any message on the display,
all you have to do is to create a section with ‘blank’ spaces. And set the timer to
have that ‘blank’ message to be display at the specific time.