Allied Telesis NETEXTREME II AT-2973SX - Manual (Page 128)

Chapter 9: Installing CIM and SNMP for Manageability
128
The extensible-agent allows the SNMP manager software to actively
monitor the configurations of the Broadcom NetXtreme II adapter. It
supplements the information already provided by the standard SNMP
Management Network Interface information.
The extensible-agent provides in-depth information about a Broadcom
NetXtreme II adapter including:
 MAC address
 Bound IP address
 IP subnet mask
 Physical link status
 Adapter state
 Line speed
 Duplex mode
 Memory range
 Interrupt setting
 Bus number
 Device number
 Function number
To monitor this information, an SNMP manager needs to load the
Broadcom Extended information MIB file to allow monitoring of the
information listed above. See the following procedure.
The monitored workstation requires the installation of the Broadcom
Extended Information SNMP extensible-agent, bcmif.dll, and requires the
Microsoft Windows Server 2003, Windows Server 2008, or Windows
Server 2008 R2 SNMP service to be installed and loaded.
Loading the
SNMP Libraries
By default, the BACS utility does not load the SNMP libraries. You need to
select this option.
To load the SNMP libraries on your PC, do the following:
1. Download the BACS utility from the Allied Telesis website.
This utility is available from the www.alliedtelesis.com/support/
software website. After you have accessed this website, enter the
model number in the Search by Product Name box and click Find to
view the current list of available files.
2. Download BACS onto your PC.
3. On your PC, open the InstallShield.