Allied Telesis NETEXTREME II AT-2973SX - Manual (Page 25)

AT-2973SX, AT-2973T, and AT-2973T/4 NetExtreme II Family Adapters Installation and User’s Guide
25
Note
For specific systems, see your system documentation for
information about support of the WOL feature.
Adaptive
Interrupt
Frequency
The adapter driver intelligently adjusts host interrupt frequency based on
traffic conditions to increase overall application throughput. When traffic is
light, the adapter driver interrupts the host for each received packet,
minimizing latency. When traffic is heavy, the adapter issues one host
interrupt for multiple, back-to-back incoming packets, preserving host CPU
cycles.
ASIC with
Embedded RISC
Processor
The core control for Broadcom NetXtreme II adapters resides in a tightly
integrated, high-performance ASIC. The ASIC includes a RISC processor.
This functionality provides the flexibility to add new features to the card
and adapts it to future network requirements through software downloads.
This functionality also enables the adapter drivers to exploit the built-in
host offload functions on the adapter as host operating systems are
enhanced to take advantage of these functions.
Supported
Operating
Environments
The Broadcom NetXtreme II adapter has software support for the following
operating systems:
 Microsoft Windows Server 2003 (32-bit and 64-bit extended)
 Microsoft Windows Server 2008 (32-bit and 64-bit extended)
 Microsoft Windows Server 2008 R2 (32-bit and 64-bit extended)
 Microsoft Windows Vista (32-bit and 64-bit extended)
 Microsoft Windows 7 (32-bit and 64-bit extended)
 Microsoft Windows Server 2008 R2 Hyper-V
 Linux (32-bit and 64-bit extended)
 MS-DOS
 ESX Server (VMware)
 Citrix XenServer