Allied Telesis NETEXTREME II AT-2973SX - Manual (Page 17)

AT-2973SX, AT-2973T, and AT-2973T/4 NetExtreme II Family Adapters Installation and User’s Guide
17
AT-2973SX
Adapter
The AT-2973SX adapter connects a PCI-E compliant server or workstation
to a Gigabit Ethernet network using fiber optic cabling and a connector that
meets 62.5/125 µm or 50/125 µm multimode specifications. This adapter
operates at speeds of 1000 Mbps in full-duplex mode.
The AT-2973SX adapter is show in Figure 1.
Figure 1. AT-2973SX Adapter
AT-2973SX Adapter Physical Description
The faceplate on the AT-2973SX adapter provides two fiber optic
connectors for attaching the adapter to a compatible link partner. See
Figure 2 for an illustration of the adapter’s faceplate.
The AT-2973SX adapter has two fiber ports and two LEDs per port, as
shown in Figure 2 and described in Table 1 on page 18. The state of the
network link and activity is indicated by a single LED located adjacent to
the port connector.
Figure 2. AT-2973SX Faceplate
1696
100
ACT
LNK
AT
I
1699
100
ACT
LNK