AMX ViewStat - Manual (Page 45)

Set Up and Configuration
39 ViewStat Communicating Thermostat
Set Up and Configuration
The ViewStat has many features that can be adjusted to customize operations. Temperature Control Set Up,
Balance Point Set Up and Communications Set Up, in particular, should only be adjusted with the help of a
qualified service technician.
When first powered up, the Message Display will scroll through the current mode status, fan status, and
Heating/Cooling output status. This is referred to as Passive Display because you do not interact with it. To get
into the set-up menu, press the Enter and Mode buttons simultaneously.
Thermostat Set-Up is menu driven but only again, one menu item is visible at a time. FIG. 32 shows the entire
Main Menu. Selecting any one of the Main Menu items (by pressing the Enter button) will enter a
corresponding Sub-Menu. The Scroll Up and Scroll Down buttons are used to move between menu items or
change adjustable values. The Enter button is used to select a menu item or enter a value. When in Thermostat
Set-Up, if none of the three navigation buttons are pressed in 5 minutes, the display will return to Passive
Display.
The following items are configured in thermostat set-up:
FIG. 32 Main Menu
to enter User-Interactive display
Use the Scroll Up and Scroll Down
buttons to move between menu items
and change values.
Use to Scroll
Use to Select
Network Override
Set Up Next
Thermostat
Lockout More
Security
Set Up More
Communications
Set Up More
Temperature
Set Up More
Backlight
Set Up More
Balance Points
Set Up More
Display
Set Up More
EXIT
Back
+ Press
to select a menu item or to enter a value Press
Auto - 5 seconds
Message display
Select EXIT to return to the main menu from a
sub-menu.
Select EXIT to return to passive display from
the Main menu.