Samsung LE26R71B - Manual (Page 11)

English-9
 Programme: Selects a program number for the channel.
 Colour System: Sets the colour supporting system.
 Sound System: Sets the sound supporting system.
 Channel: Selects a channel.
 Search: Scans for the frequency value for the channel.
 Store: Saves your settings.
Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.
1. Press the menu button to display the menu. Press the  or  button
to select “Channel”, then press the enter button.
2. Press the  or  button to select “Channel Manager”,
then press the enter button.
3. Press the enter button again, to select “Channel Manager”.
4. Press the  button to select “ ”.
5. Press the  or  button to select the undesired channel,
then press the enter button to cancel.
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the exit button to exit.
“ ” is active when “Child Lock” is selected to “On”.
Setting the Channel manager
You can select these options by
simply pressing the
Ch mgr
button on the remote control.
You can select these options
by simply pressing the
Ch mgr
button on the remote control.
5. Press the  or  button to select “Colour System”, then press the enter button.
6. Select the colour standard required by pressing the  or  button then, press the enter button.
7. Press the  or  button to select “Sound System”, then press the enter button.
8. Select the sound standard required by pressing the  or  button, then press the enter button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the  or  button to select “Channel”. Press the enter button.
Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel. Select the
required number by pressing the  or  button and then press the enter button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the  or  button to select “Search”.
Press the enter button. Search by pressing the  or  button and then press the enter button.
11. Press the  or  button to select “Store”. Press the enter button to select “OK”.
12. Repeat steps 3 to 11 for each channel to be stored.
BN68-00983A-01Eng.indd 9 2006-02-02 ¿АИД 2:57:04