Audio Authority High Definition Cat 5 Matrix AVX-562 - Manual (Page 18)

18 Audio Authority AVAtrix User Manual
Audio Authority AVAtrix User Manual 19
Setup Menu Chart
Settings
Lockout Front Panel Keys Lockout all front panel keys except for Display and the key sequence for Setup Menu
access.
Lockout Front Panel IR Detector Detection ignores any IR commands visible from the front panel IR window; IR input
jack on rear is still active.
Enable Display Blanking Allows the front panel display to turn off after a period of inactivity.
Enable Feedback for Private
Viewing When enabled, this feature causes a brief break in the video signal as an indication
that an “IR lock” or “view lock” signal has been implemented.
Name the Sources Assign custom abbreviations and custom long names to each source.
Learn IR Commands Teach the AVX-562 to respond to 3rd party IR commands.
Name Groups Assign custom abbreviations and custom long names to each group of zones.
Assign Outputs to Groups Divide the array of Cat 5 receiver outputs into geographic or functional zone ”groups”.
Assign Restrictions Restrict source signals from particular zone wallplate/receivers
Save/Load File
Save Current Setup to Flash Card Save the current setup configuration to memory card in rear slot. Does not overwrite
any existing setup files.
Load New Setup from Flash Card Scan and choose firmware upgrades from card or import setup data saved from an
AVAtrix or saved from the AVAtrix PC application.
Load Demonstration Setup Loads example setup including custom short and long source names and 24 simulated
remote Wallplate locations.
Load Default Setup Clears user setup and loads factory default setup.
Upgrade Operating System Choose from available operating system firmware files on the flash memory card to
install a firmware upgrade.
Contact Installer Enter contact information. Up to four lines, 42 characters per line.
Diagnostics
Expander Address
Shows letter address of all detected expanders, including the six native AVX-562 Cat 5
matrix outputs.
Local IR Shows on/off times of IR signals received through the front panel.
Zone IR Shows on/off times and carrier of IR signals received through the Cat 5 wallplate/
receivers.
Firmware Version Shows the firmware version loaded on each component of the AVAtrix system, and the
firmware upgrades available on a flash card loaded in the card slot.
Source and Control Restrictions Shows the parental restrictions on sources to wallplate/receivers and local output.
f. Assign Restrictions. These controls allow the
system administrator to prevent a zone from
viewing a source. This operation is password
protected (2-3-6). It is recommended to set up
these restrictions via the PC Utility (page 18).
g. Save/Load File. When all custom options are
complete, save the setup to the flash card in
case system settings are changed or lost. The
card can be kept either in the AVAtrix or in some
other safe location. A card could also be used to
quickly set up similar AVAtrix systems installed in
other locations. The Installer can keep a copy of
each AVAtrix installation on a card for reference.
To initialize a blank card, download the files from
www.audioauthority.com/page/software, expand
the zip archive, and copy the files onto the card.
h. Diagnostics. See Appendix C for instructions on
IR, addressing, and other diagnostics.
Group view offers control of zone groups by name, and can be used
in six-zone systems to name the zones.
Group Name
Group Number
1 2 3 4 5 6