Agilent Technologies Agilent 82350B - Manual (Page 25)

Installing and Configuring the 82350B 1
82350B Installation and Configuration Guide 13
Step 4: Configuring the 82350B
This step shows how to configure a Windows
XP/Vista/7/8/Server 2008 R2 operating system for a PC that
has an 82350B installed.
Installing configuration files
1 Apply Power. Apply power to the PC and to the installed
GPIB instruments. As Windows starts again, a Found New
Hardware Wizard may start.
2 Install Configuration Files. Click Next> to accept the
defaults. (Make sure that you have installed Agilent IO
Libraries Suite first. You will not need a CD.) Click Finish to
complete the installation.
3 Open Connection Expert. Click the Agilent IO Control icon
on the Windows taskbar notification area, and then click
Agilent Connection Expert. When the main screen appears,
you will see a map of the system connections in the
Instrument I/O on this PC pane (also called “Explorer
Pane”). If you see your interface and instruments in the
Explorer Pane, you are ready to go!
N O T E
For help with Connection Expert, refer to the Agilent IO
Libraries Suite help file. This help file is available from the IO
Control > Documentation menu.