Agilent Technologies Agilent 82350B - Manual (Page 40)

2 Troubleshooting Guidelines
28 82350B Installation and Configuration Guide
Agilent IO Libraries Suite Checks
This section gives guidelines to troubleshoot problems
involving the Agilent IO Libraries Suite, including:
• Check IO Libraries Suite installation
• Check IO Control operation
• Install IO Libraries Suite (if 82350B was Installed First)
Check IO Libraries Suite installation
Start your Agilent IO Libraries Suite troubleshooting sequence
by verifying IO Libraries Suite installation. If the IO Libraries
Suite is installed, go to Check IO Control Operation.
1 Check Agilent IO Libraries version. If a version of the IO
Libraries Suite has been installed, the IO icon is normally
displayed on the Windows taskbar notification area.
Figure 2-2 IO icon on the Windows taskbar notification area
N O T E
If possible, you should always use the current version of the
Agilent IO Libraries Suite. This version supports the newest
interfaces and operating systems, and has the most advanced
features. However, you may need an earlier version of the IO
Libraries Suite to support an older interface or operating
system. For example, Agilent IO Libraries Suite 14.0 is required
for Windows 98SE or Windows Me. If you need an earlier
version of Agilent IO Libraries, go to
http://www.agilent.com/find/iolib to locate the version
you need.