Nilfisk-ALTO CLE8.0 - Manual (Page 10)

3.5 The Rear Panel
9
Pic.6: Pear Panel Of The CLE8.0
OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
OPERATING LEVEL
RETURN SEND
4dBu
10dBV
INPUT
OPERATING LEVEL
RETURN SEND
4dBu
10dBV
INPUT
OPERATING LEVEL
RETURN SEND
4dBu
10dBV
INPUT
OPERATING LEVEL
RETURN SEND
4dBu
10dBV
INPUT
OPERATING LEVEL
RETURN SEND
4dBu
10dBV
INPUT
OPERATING LEVEL
RETURN SEND
4dBu
10dBV
INPUT
OPERATING LEVEL
RETURN SEND
4dBu
10dBV
INPUT
OPERATING LEVEL
RETURN SEND
4dBu
10dBV
INPUT
OUTPUT
CHANNEL 1 CHANNEL 2 CHANNEL 3 CHANNEL 4 CHANNEL 5 CHANNEL 6 CHANNEL 7 CHANNEL 8
AC INPUT
EUROPE
210-240V
50Hz
RATED POWER CONSUMPTION: 40W
Fuse:T315mAL
Apparaten skall anslutas till
Jordat uttag nar den ansluts
Till ett natverk
2 1
3
2 1
3
2 1
3
2 1
3
2 1
3
2 1
3
2 1
3
2 1
3
20
21
22 25 24 23
Useonly witha 250V fuse Useonly witha 250V fuse Useonly witha 250Vfuse
USA / Canada
100-120V 60Hz
Fuse:T630mAL
UK / Aust
240V 50Hz
Fuse:T315mAL
18. Peak Limiter Control
The threshold level of the Peak Limiter is adjusted by this control.
19. Peak Limiter LED
This Led will light up when the Limiter function is activated.
These connectors are used to input the signal source. You can input the signal via the balanced 1/4" TRS phone jack
or XLR connector.
21. Audio In
20. AC Inlet and Fuse Holder
This connector is used to connect the supplied power cord. Please check the Voltage accepted by the unit and the
Voltage available from your AC sockets before connecting the unit to the Mains.
22. Audio Out
These connectors are used to output the signal. You can output the signal via the balanced 1/4" TRS phone jack or
XLR connector.
This control is used to adapt this unit to either the -10dBV home recording operating level or the +4dBu professional
studio operating level.
The Input / Output Level Meter (2) is referenced automatically to the selected level, i.e. an optimum operating range
of the meter will always be ensured.
23. Operating Level Control
24. Send
Through this 1/4" unbalanced jack the audio signal can be routed to an external processor for sidechain effect.
25. Return
The return signal from an external processor will be inputted through this 1/4" jack.