Agilent Technologies U2802A - Manual (Page 23)

Getting Started 1
Agilent U2802A 31-Channel Thermocouple Input User’s Guide 13
application will compile, link, and execute without error. The test results,
however, may be quite different because different instruments measure
and generate signals differently. For more information on class- compliant
interfaces and capability groups, visit www.ivifoundation.org.
Using Class-Compliant Interface
Generally, you gain no advantage from using class- compliant interface over
using just the instrument- specific interface. However, if you can isolate the
usage of the instrument- specific interface, you may see some advantages.
Replacing the IVI- COM driver then involves fixing the syntactic
incompatibilities in the isolated code.
IVI- COM drivers will be provided to users. The drivers can also be used in
a variety of development environments. For more information on IVI, visit
www.ivifoundation.org.
Below are the IVI- COM drivers provided:
✔
AgilentVEE support through COM mechanism using IVI- COM
✔
Visual Basic 6 support through COM mechanism using IVI- COM
✔
C++ support through COM mechanism using IVI- COM
✔
Visual Basic 7 support through COM Interop mechanism using IVI- COM
✔
C# support through COM Interop mechanism using IVI- COM
✔
National Instruments LabVIEW support through COM mechanism using
IVI- COM
The Agilent firmware update utility is provided to allow users to update
firmware on instruments. Update is made available through Agilent
Developer Network (ADN) website:
www.agilent.com/find/adn
U2802A_UG.book Page 13 Friday, November 25, 2011 10:57 AM