Samsung EC-S1050BDA-AS - Manual (Page 17)

《16》
Starting the recording mode
■ How to use the MANUAL mode ( )
You can manually configure all functions with the
aperture value and shutter speed.
1. Select the MANUAL mode by rotating the mode
dial.
2. Press the + / - button and menu for the shutter
speed and aperture value will display.
Up / Down button : changes aperture value
Left / Right button : changes shutter speed.
3. Press the + / - button twice and take an image.
■ How to use the SHUTTER PRIORITY mode ( )
1. Select the SHUTTER PRIORITY Mode by
rotating the mode dial.
2. Set the shutter speed by using the +/-, Left/Right
button.
3. Press the + / - button twice and take an image.
* High Shutter speeds can capture a moving object in
a still image as if the object is not moving.
Low Shutter speeds can capture a moving object
with an ‘active’ effect.
[SHUTTER PRIORITY mode]
● Things to watch out for using the ASR mode
1. The digital zoom will not operate in the ASR mode.
2. If the lighting condition is brighter than fluorescent lighting condition, the ASR
will not activate.
3. If the lighting condition is darker than in fluorescent lighting condition, camera
shake warning indicator ( ) will display. For best results only take pictures
in situations where the camera shake warning indicator ( ) is not
displayed.
4. If the subject is moving, the captured image may be blurred.
5. Avoid moving the camera while the [Capturing!] message is displayed to
achieve a better result.
6. As the ASR uses the camera's digital signal processor, it may take a little
longer for the camera to process and save the images.
[ ASR mode ]
■ How to use the ASR (Advanced Shake Reduction)
mode ( )
Advanced Shake Reduction (ASR) mode.
This mode will reduce the effect of camera shake
and help you get a well-exposed image in dim
conditions.
[MANUAL mode]