Samsung EC-S1050BDA-AS - Manual (Page 37)

《36》
● [LCD save] sub menu
[Off]: The LCD monitor will not be turned off.
[On]: If you select the [LCD Save] and the camera
isn't operated during the specified time(about
30 SEC.), the camera power will be idle(LCD
monitor : OFF, Camera status lamp :
Blinking) automatically. To use the camera
again, press any of the camera buttons
except the power button.
[ LCD save ]
■ If you set the [LCD save] to On and the camera isn't operated during the
specified time, the LCD monitor will be turned off automatically.
● After replacing the battery or connect the AC adapter again, the poweroff
setting will be preserved.
● In the PC / Printer mode and Playback mode, LCD save fuction will not
available.
INFORMATION
Setup 2 ( )
Quick View
SETUP2
Video Out On
Off
Power Off
LCD Save
Format
Reset
Back Set OK
[ Quick view ]
■ If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
● Sub menus
[Off] : The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
[ Auto power off ]
■ This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
● Sub menus
[Off] : The power off function will not operate.
[1, 3, 5, 10 min] : The power will turn off
automatically if not used for the
period of time specified.
- After replacing the battery, the power off setting
will be preserved.
- Note that the automatic power off function will not operate if the camera is in
PC / Printer mode, slide show, playing back a voice recording, playing back a
movie clip.
Quick View
SETUP2
LCD Save
Video Out
Off
1 sec
3 sec
0.5 sec Power Off
Format
Reset
Back Set OK
Quick View
SETUP2
LCD Save
Video Out
5 min
10 min
Off
1 min
3 min
Power Off
Format
Reset
Back Set OK