Samsung EC-S1050BDA-AS - Manual (Page 25)

《24》
Macro ( ) / Down button
■ While the menu is showing, press the DOWN button to move from the main
menu to a sub menu, or to move down the sub menu. When the menu is not
showing, you can use the MACRO / DOWN button to take macro pictures. The
distance ranges are shown below. Press the Macro button until the desired
macro mode indicator displays on the LCD monitor.
■ Types of focus modes and focus ranges (W: Wide, T: Tele) (Unit : cm)
Mode Focus Type Focus range Mode Focus Type Focus range
[Auto macro ( )] [Macro ( )] [Super Macro ( )]
Auto
Auto
W:80-Infinity
T:150-Infinity
W:10-Infinity
T:50-Infinity
W:80-Infinity
T:150-Infinity
W:10~80
T:50~150
W:1~10
(Wide only)
W:1-Infinity
T:50-Infinity
Auto
macro
Normal
Macro
Super
Macro
Manual
focus
Program
Program
■ In the Program, A, S, M modes, you can change the aperture value and shutter speed
by pressing this button.
●Manual Focus : Where the automatic focusing is not
available, for example, in very dark
conditions, you can set the focus
manually. Please be careful when
using the manual focus as the
picture can be blurred easily.
●How to use the Manual Focus
1. Press the Macro button three times. Then
Manual Focus bar will be displayed.
2. Set the focal length by using the Up/ Down
button. Press the shutter button to capture an
image.
Up button : moves the point of focus further away
Down button : moves the point of focus nearer
● When the macro mode is selected, it is possible that camera shake will
occur. Take care not to shake the camera.
● When you take a picture within 20cm in the Macro mode, select the FLASH
OFF mode.
INFORMATION