Samsung DVD-VR345-XAA - Manual (Page 38)

38 - English
S
ystem Setup
Setting Up the
Display(Video) Options
This function allows you to setup the TV screen
settings.
1 With the unit in Stop mode/No Disc mode, press
the
MENU button.
2 Press the …† buttons to select Setup , then press
the ENTER or √ button.
3 Press the …† buttons to select Video , then press
the ENTER or √ button.
Video option menu will be displayed.
4 Press the …† buttons to select the desired video
option, then press the
ENTER or √ button.
5 Press the …† buttons to select the desired item,
then press the
ENTER or √ button.
Press the RETURN or œ button to return to the
previous menu.
Press the MENU button to exit the menu.
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box : Select when you want to see the
total 16:9 ratio screen DVD sup-
plies, even though you have a TV
with a 4:3 ratio screen. Black
bars will appear at the top and
bottom of the screen.
• 4:3 Pan & Scan : Select this for a conventional size
TV when you want to see the
central portion of the 16:9 screen.
(Extreme left and right side of
movie picture will be cut off.)
• 16:9 Wide : You can view the full 16:9 picture on
your wide-screen TV.
Input Level
Adjusts the level of the input signal.
• Darker : If you feel the screen is too light
and you want to make the screen
darker.
• Lighter : If you feel the screen is too dark
and you want to make the screen
lighter.
Black Level
Adjusts the black level of the screen.
• 7.5 IRE : This will enhance the black level for
increased brightness/contrast when
viewing DVDs.
Select this when you want to make the
screen lighter.
• 0 IRE : This is the standard NTSC reference black
level for consistent brightness/contrast
across all sources.
Select this when you want to make the
screen darker.
3D Noise Reduction
• Off : Normal
• On : Select to remove noise from the screen.
This function depends on disc type. It may not
work for some disc types.
IRE: Short for the Institute of Radio Engineers.
An IRE unit is a relative unit of measure
equaling 1/140th of the peak-to peak (p-p)
video amplitude.
Black level function is not available in the progres-
sive scan mode.
Note
Setup DVD-Recorder
No Disc
Timer Rec.
Setup
System √ √
Clock Set √ √
Channel Set √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
RETURN ENTER MOVE EXIT
Video DVD-Recorder
No Disc
Timer Rec.
Setup
TV Aspect : 16:9 Wide √ √
Input Level : Darker √ √
Black Level : 7.5 IRE √ √
3D Noise Reduction : Off √ √
HDMI/DVI Resolution : 480P √ √
DivX(R) Registration √ √
RETURN ENTER MOVE EXIT
00995G-VR345-XAA-Eng31-46 2006.5.11 10:3 AM Page 38