Samsung DVD-VR345-XAA - Manual (Page 70)

70 - English
R
ecording
Editing the Scheduled
Record List
Follow these directions to edit the timer record list.
1 Press the MENU button.
2 Press the …† button to select Timer Rec. , then
press the ENTER or √ button.
3 Press the …† button to select Scheduled Record
List , then press the ENTER or √ button.
4 Press the …† button to select the number of the
scheduled record list you want to edit, then press
the
ENTER or √ button.
• The Edit and Delete items are displayed.
Timer Record DVD-Recorder
Title List
Playlist
Disc Manager
Timer Rec.
Setup
Copy
DVD-RAM(VR)
Timer Record √ √
Scheduled Record List √ √
Scheduled Record List DVD-Recorder
DVD-RAM(VR) Current Time 12:27 AM
No. To Source Date Start End Mode Edit
01 DVD CH06 01/01 03:05AM 05:05AM SP √ √
02 DVD CH06 01/02 01:06AM 03:06AM SP √ √
03 –– ––– –– / –– –– : –– –– –– : –– –– –– √ √
Scheduled Record List DVD-Recorder
DVD-RAM(VR) Current Time 12:27 AM
No. To Source Date Start End Mode Edit
01 DVD CH06 01/01 03:05AM 05:05AM SP √ √
02 DVD CH06 01/02 01:06AM 03:06AM SP √ √
03 –– ––– –– / –– –– : –– –– –– : –– –– –– √ √
Edit
Delete
RETURN ENTER MOVE EXIT
RETURN ENTER MOVE EXIT
RETURN ENTER MOVE EXIT
• Recording mode (VCR)
AUTO : Select when you want to set video quality
automatically. The auto quality depends on
remaining time of VCR tape.
SP : Standard Play, for best picture quality.
SLP : Super Long Play, for maximum recording time
(3 times SP).
7 Press the ENTER button.
• will appear on the front panel. It means that a
timer recording is registered.
If the timer settings overlap
The programs are recorded in order of priority.
If timer recording is set for the first program and
then again for the second program and both
programs overlap, the following message will
appear on the screen: “This setting is identical with
1,2.” The message shows that the first program has
priority. After recording of the first program is
complete, the second program starts being
recorded.
To exit without saving the current setting
Press the MENU or TIMER REC button.
To return to the previous menu
Press the RETURN button if you don’t want to set a
timer recording.
8 Turn the power off to finish the timer recording.
•
will blink if disc or tape is not inserted.
The timer recording time may differ from the set
time depending on disc status and overall timer
recording status (for example, recording times
overlapping, or when the previous recording
ends within 3 minutes before the start time of
the next recording.)
Note
When you are recording at EP mode on a
DVD-RW(V)/-R disc, it may not record for the
full 6 or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING system.
For example, if you record a program with a lot
of action, it uses a higher bit rate which in turn
consumes more disc memory. Note
00995G-VR345-XAA-Eng47-75 2006.4.10 2:53 PM Page 70