Samsung DVD-VR345-XAA - Manual (Page 73)

English - 73
R
ecording
You can copy from the DVD to VCR or VCR to DVD.
Check the remaining time on the tape and Disc.
To copy from DVD to VCR
1 With the unit in Stop mode, press the MENU
button.
2 Press the …† buttons to select Copy , then press
the ENTER or √ button.
3 Press the …† buttons to select DVD --> VCR ,
then press the ENTER or √ button.
4 Press the …† buttons to select Edit Copylist ,
then press the ENTER or √ button.
Copy to DVD or VCR
DVD-->VCR DVD-Recorder
Title List
Playlist
Disc Manager
Timer Rec.
Setup
Copy
DVD-RAM(VR)
New Copylist √ √
Edit Copylist √ √
Direct Copy √ √
Edit Copylist
1/2
DVD-Recorder
01 JAN/01/2006 12:0 00:00:11 √ √
02 JAN/01/2006 12:0 00:00:09 √ √
No. Title Length Edit
DVD-RAM(VR)
JAN/01/2006 12:00 AM
1 Scene
JAN/01/2006 12:00 AM
Copy DVD-Recorder
Title List
Playlist
Disc Manager
Timer Rec.
Setup
Copy
DVD-RAM(VR)
DVD-->VCR √ √
VCR-->DVD √ √
RETURN ENTER MOVE EXIT
RETURN ENTER MOVE EXIT
RETURN ENTER MOVE EXIT
(VR mode)
1 To Watch a Different Channel from the
One being Recorded
When you watching through the Antenna input
during recording, Press the TV/VCR button on the
remote control. Change the channel you want to
watch with the TV's remote.
2 Watch a different media during record-
ing
You can watch a DVD during VCR recording or
watch a Video tape during DVD recording.
• During VCR recording, insert a DVD in the DVD
deck. The output will automatically change to the
DVD and start playback.
• During DVD recording, insert a Video tape in the
VCR deck. The output will automatically change
to the VCR and start playback. (Only if tape is
missing the safety tab)
3 To Add Recording Time
Refer to the One-Touch Recording (OTR).
(See page 68)
4 Recording on the DVD and VCR at the
same time
You can record on the DVD and VCR at the same
time, but both modes must be set up to record
separately.
• Press the DVD/VCR button to set the unit to
DVD or VCR mode.
• Choose AV input mode (CH, AV1, AV2 or DV).
for DVD or VCR.
• Choose REC mode for DVD or VCR.
• Press
REC button for DVD or VCR.
When the DVD Recorder & VCR is connected
to your TV using an S-Video or component
video cable, the video tape's playback screen
will not be displayed during DVD recording.
You cannot record different channels at the same
time.
The DVD and VCR cannot start recording at the
exact same time. You must set one mode to start
recording, then the other.
Note
00995G-VR345-XAA-Eng47-75 2006.4.10 2:53 PM Page 73