Samsung DV17MSSANR - Manual (Page 13)

English 11
Français
Español
Deutsch
Italiano
English
Portuguese
Automatic Save
Whenever you open the On Screen Display and allow an adjustment window to remain active
for about 3 seconds without pressing another button, the monitor automatically saves any
adjustments you have made. These changes are saved into a user area in the monitor. User
areas are reserved according to the signal frequency from your computer. The monitor can
save adjustments for up to 5 user modes. It has ten factory preset or preload modes, one for
each signal frequency as listed in “Display Modes” on page 23
If you have made no adjustments, the on screen display disappears and the monitor does not
save anything. To exit without saving the changes you have made, press the
EXIT button
before the 2 seconds elapse.
Direct-Access Features
The features described in this section can be accessed quickly, at the touch of one button.
Once you finish making adjustments to a feature, push the
EXIT button to turn off the menu
or allow the OSD to time-out and disappear automatically.
Brightness
Follow these instructions to adjust the brightness of
the monitor’s display.
1 With the menu off, push the “
–
” or “
+
”
button. The brightness display appears.
2 Push the “
+
” button to increase the
brightness; push the “
–
” button to decrease
the brightness.
Brightness
99
Adjusting Your LCD Monitor
3 S/M 870/770/170 (E) body.FM Page 11 Wednesday, December 20, 2000 2:00 PM