Setting up your lcd monitor – Samsung DV17MSSANR User Manual
Page 9
English 7
Français
Español
Deutsch
Italiano
English
Portuguese
Getting Help
If your monitor does not display an image, check your cable connections and refer to
“Troubleshooting” on page 18. If you experience difficulties with the quality of the displayed
image, run auto adjustment again and refer to “Adjusting Your LCD Monitor” on page 10 or
“Troubleshooting” on page 18.
Plug and Play
Our adoption of the new VESA
®
Plug and Play solution eliminates complicated and time
consuming setup. It allows you to install your monitor in a Plug and Play compatible system
without the usual hassles and confusion. Your PC system can easily identify and configure
itself for use with your display. This monitor automatically tells the PC system its Extended
Display Identification (EDID) data using Display Data Channel (DDC) protocols so the PC
system can automatically configure itself to use the LCD Monitor.
Auto Adjustment
Even though your computer system can recognize your new LCD Monitor system, the auto
adjustment function will optimize the display settings for use with your computer. Auto
Adjustment can be accessed through the
On Screen Display, see “Image Lock:” on page 14 or use the direct access instructions below:
1
Turn on your computer and monitor.
2
Push the
AUTO
button to open the Auto Adjustment OSD.
3
The screen will dim and you may notice small changes to the screen image.
Installing the Video Driver
When prompted by the operating system for the monitor driver, insert the Driver diskette
included with this monitor. Driver installation is slightly different from one operating system
to another. Follow the directions as appropriate for the operating system you have.
Setting up Your LCD Monitor
3 S/M 870/770/170 (E) body.FM Page 7 Wednesday, December 20, 2000 2:00 PM