Setting up your lcd monitor – Samsung DV17MSSANR User Manual
Page 8
English 6
Figure 3.2 DVI-I Cable Connection (SyncMaster 170T only)
1
Turn off your computer and unplug its power cord.
2
Connect the signal cable to the DVI-I connector (1) on the back of your monitor.
Connect the other end of the cable to the video port on the back of your computer.
3
Connect the power cord for your monitor to the power port on the power adapter.
4
Secure the power adapter cord and the signal cable(s) under the metal prong.
5
Insert the tab on each side of the hinge cover (b) then attach the stand of the monitor.
6
Plug the power cords of your computer and your monitor into a nearby outlet.
7
Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
8
Perform the auto adjustment procedure as described in “Auto Adjustment” on page 7.
(1)
(b)
(a)
Setting up Your LCD Monitor
3 S/M 870/770/170 (E) body.FM Page 6 Wednesday, December 20, 2000 2:00 PM