Samsung HT-EM35-ZA - Manual (Page 16)

| 16
English
Connections
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button,
the mode changes in this order : BD/DVD D. IN AUX FM
HDMI OUT
AUX
IN
VIDEO
OUT
OPTICAL
DIGITAL
AUDIO IN
FM ANT
L
R
OPTICAL OUT
HDMI OUT
AUX
IN
VIDEO
OUT
OPTICAL
DIGITAL
AUDIO IN
FM ANT
L
R
HDMI OUT
AUX IN VIDEO OUT
OPTICAL
DIGITAL AUDIO IN
FM ANT IMPEDANCE : 3
Ÿ SPEAKERS OUT
CENTER
SUBWOOFER
FRONT L SURROUND L
FRONT R SURROUND R
L
R
LAN
R
Red
W
White
Method 1 Method 2
External Devices
Method 1 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analog component.
 Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device using a digital optical cable.
 Select the D. IN mode.
| NOTE |
\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
(Cable not supplied.) (Cable not supplied.)
HT-EM35_ZA_0227.indd 16 HT-EM35_ZA_0227.indd 16 2012-02-27 오전 10:53:55 2012-02-27 오전 10:53:55