Samsung HT-EM35-ZA - Manual (Page 27)

English
27 |
04
Settings
| IMPORTANT |
\ Never turn the home theater on or off manually during a
software upgrade.
3 · The update progress popup appears. When
the update is completed, the product turns
off automatically again.
4 · Press the POWER button to turn on the
product.
| NOTE |
\ The update is complete when the product turns off
after restarting. Press the POWER button to turn on the
updated product for your use.
\ Never turn the product off or on manually during the
update process.
\ Samsung Electronics takes no legal responsibility for
a product malfunction caused by an unstable internet
connection or consumer negligence during software
upgrade.
By USB
1 · Visit www.samsung.com.
2 · Click SUPPORT on the top right of the page.
3 · Enter the product's model number into the
search field, and then click Find Product.
4 · Click Get downloads in the center of the
page below the Downloads header.
5 · Click Firmware in the center of the page.
6 · Click the ZIP icon in the File column on the
right side of the page.
7 · Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
8 · Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
9 · Copy the folder to a USB flash drive.
10 · Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
11 · In the product’s menu, go to Settings >
Support > Software Upgrade.
12 · Select By USB.
| NOTE |
\ There should be no disc in the product when you upgrade
the software using the USB Host jack.
\ Never turn the product off or on manually during the
update process.
\ When the software upgrade is done, check the software
details in the Software Upgrade menu.
Auto Upgrade Notification
If your product is connected to the network and
you set Auto Upgrade Notification on, the product
will notify you if a new software version is available
with a pop-up message.
1 · Turn on the product.
2 · In the Software Upgrade menu, set Auto
Upgrade Notification to On.
If there is a new software version available,
the product will notify you with a pop-up
message.
3 · To upgrade the firmware, select Yes. The
product turns off automatically, turns on, and
then begins the upgrade.
4 · The update progress popup will appear.
When the update is complete, the product
will turn off automatically again.
5 · Press the POWER button to turn on the
product.
| NOTE |
\ The update is complete when the product turns off
after restarting. Press the POWER button to turn on the
updated product for your use. Never turn the product on
or off manually during the update process.
\ Samsung Electronics shall take no legal responsibility
for product malfunction caused by unstable of internet
connection or consumer negligence during software
upgrade.
HT-EM35_ZA_0227.indd 27 HT-EM35_ZA_0227.indd 27 2012-02-27 오전 10:54:34 2012-02-27 오전 10:54:34