Samsung HT-EM35-ZA - Manual (Page 34)

| 34
English
Media Play
Listening to Radio
Using Buttons on the Remote Control
1 · Press the FUNCTION button to select FM.
2 · Tune in to the desired station.
• Preset Tuning 1 : Press the 5 button
to select PRESET and then press the
TUNING UP, DOWN button to select the
preset station.
- Before you can tune to preset stations,
you must add preset stations to the
product's memory.
• Manual Tuning : Press the 5 button
to select MANUAL and then press the
TUNING UP, DOWN button to tune in to a
lower or higher frequency.
• Automatic Tuning : Press the 5 button
to select MANUAL and then press and
hold the TUNING UP, DOWN button to
automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory.
1 · Press the FUNCTION button to select FM.
2 · Press the TUNING UP, DOWN button to
select <89.10>.
3 · Press the TUNER MEMORY button.
• NUMBER flashes on the display.
4 · Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the display on its
own.
• After you press the TUNER MEMORY
button, NUMBER disappears from the
display and the station is stored in memory.
5 · To preset another station, repeat steps 2 to 4.
• To tune in to a preset station, press the
TUNING UP, DOWN button.
Using the Special Effects Remote
Control Buttons
SOUND EFFECT Function
SOUND
EFFECT
Lets you select a mode that optimizes the sound.
MP3 ENHANCER  SMART VOLUME  POWER
BASS
OFF
• MP3 ENHANCER : Helps enhance your sound
experience (ex. mp3 music). You can upscale your
MP3 level sound (24 kHz, 8bit) to CD level sound
(44.1 kHz, 16bit).
• SMART VOLUME : Regulates and stabilizes the
volume level, preventing drastic volume changes
when you change channels or during scene
transitions.
• POWER BASS : Increases the volume level of bass
tones and provides thudding sound effects.
• OFF : Select this for normal listening.
Dolby Pro Logic II Function
You can select the desired Dolby Pro Logic II audio
mode.
• MOVIE : Adds realism to a movie soundtrack.
• MUSIC : When listening to music, you can experience
sound effects as if you are listening to the actual
performance.
• MATRIX : Select to hear multi channel surround
sound.
• PROLOG : Select to listen to a 2CH sound source in
5.1CH surround sound with all speakers active.
- A specific speaker(s) may not output depending on
the input signal.
HT-EM35_ZA_0227.indd 34 HT-EM35_ZA_0227.indd 34 2012-02-27 오전 10:55:07 2012-02-27 오전 10:55:07