Insert remote batteries – Samsung HT-SK6 User Manual

Page 12

Advertising
background image

PREP

ARA

TION

10

30

30

7~10m

Remove the battery cover on the back of the remote by pressing
down and sliding the cover in the direction of the arrow.

Insert Remote Batteries

Range of Operation of the Remote Control

1

Insert two 1.5V AAA batteries, paying attention to the correct polarities (+
and –).

2

Replace the battery cover.

3

The remote control can be used up to approximately
23 feet/7 meters in a straight line. It can also be
operated at a horizontal angle of up to 30° from the
remote control sensor.

Follow these precautions to avoid leaking or cracking cells:

Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).

Use the correct type of batteries.Batteries that look similar may differ in voltage.

Always replace both batteries at the same time.

Do not expose batteries to heat or flame.

CAUTION

To open the remote control cover,
push the top of the cover, then slide
downward.

Advertising
This manual is related to the following products: