Samsung HT-SK6 - Manual (Page 19)

17
Controlling a TV with the Remote
You can operate your TV by adjusting the DVD remote signal .
• If there is more than one code listed in the table,
enter one at a time to determine which code works.
1
Turn on the TV.
2
Point the DVD’s remote at the TV.
• The remote may not be able to
control every model TV of the
brands listed.
4
If the TV turns off, setup is complete.
3
While holding the button down, enter the
code for your brand.
TV
example : For SAMSUNG 1TVs
While holding down the button,
enter .
TV
Code Code
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15 SAMSUNG 1
SHARP 2
SONY
MAGNAVOX
SANYO 1
LG 2
RCA
LG 1
TOSHIBA
HITACHI
JVC
PANASONIC 1
MITSUBISHI 2
SAMSUNG 2
SAMSUNG 3 SHARP 1
ZENITH
LG 3
DAEWOO 8
SANYO 2
EMERSON
SHARP 3
SAMSUNG 4
MATSUSHITA
NOBLEX
TELEFUNKEN
NEWSAN
LOEWE
RCA2 16
17
18
19
20
21
22
23
24
25
26
27
28
29
Brand Brand
Connecting your System to the Power Supply
The AC Cord must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage.
1. Plug the AC Cord on the rear of the system into an appropriate outlet.
2. Press the On/Standby button to switch your DVD Player system on.