Samsung HT-SK6 - Manual (Page 38)

SETUP
36
Speaker delay time setting is a professional sound volume adjustment method for audio
enthusiast. For home use, refer to "Setting up the Ideal Speaker Positions" on page 11
to install speakers in appropriate locations.
5.3 ms
10.6 ms
15.9 ms
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the
table.
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each
speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement
of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and
Surround Speakers.
Setting up the Speaker Delay Time
Delay Time
Ideal CENTER SPEAKER placement
Distance between Ds and Dc
Distance between Df and Dc Delay Time
1.3 ms
2.6 ms
3.9 ms
5.3 ms
20 Inches
40 Inches
5 feet
6 feet 6.6 inches
6 feet 6.6 inches
13 feet 3.3 inches
20 feet
It is desirable to place all speakers within this circle.
Ideal SURROUND
SPEAKER placement