Samsung CLX-4195N-XAX - Manual (Page 261)

Fax
261 3. Useful Setting Menus
4
Sending setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 36).
To change the menu options:
• Press (fax) > (Menu) > Fax Setup > Sending on the control panel.
• Or press Setup > Machine Setup > Next > Default Setting > Fax Default
on the touch screen.
• Or press Setup > Machine Setup > Next > Fax Setup on the touch screen.
Item Description
Redial Times
Sets the number of redial attempts. If you enter 0, the
machine will not redial.
Redial Term Sets the time interval before automatic redialling.
Prefix Dial
Sets a prefix of up to five digits. This number dials
before any automatic dial number is started. It is useful
for accessing a PABX exchange.
ECM Mode
Sends faxes using error correction mode (ECM) to
makes sure the faxes are sent smoothly without any
error. It may take more time.
• Fax Confirmation
• Fax Send
Confirmation
Sets the machine to print a report whether a fax
transmission was successfully completed or not.
If you select On-Error, the machine prints a
report only when a transmission is not
successful.
Modem speed
Select the maximum modem speed you want if the
phone line fails to sustain a higher modem speed. You
can select 33.6, 28.8, 14.4, 12.0, 9.6 or 4.8 kbps.
Image TCR
Prints a transmission report with a minimized image of
the first page of the fax sent.
Dial Mode
Sets the dialing mode to either tone or pulse. This
setting may not be available depending on your
country.
Toll Save
Sends faxes at a preset toll-saving time to save on call
costs. This setting may not be available depending on
your country.
Setup Wizard
Makes it easy to configure the necessary fax options
such as machine ID, fax number, etc.
Item Description