Samsung EC-HZ50WZBPBUS - Manual (Page 72)

071
You can turn the Auto Focus lamp on and off.
- Sub menus
[Off] : The AF lamp does not light up in
low light conditions.
[On]* : The AF lamp lights up in low
light conditions.
Auto Focus lamp
Settings ( )
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) is an AV network system that lets you control
Anynet+ compatible Samsung AV devices connected to an Anynet+
Samsung compatible TV with the TV’s remote control. When your
camcorder is connected to a Samsung Anynet+ compatible HDTV,
you can operate the playback functions using the TV’s remote control.
Ŷ How to use Anynet+ (HDMI-CEC)
1. Connect your camcorder to your Samsung Anynet+ compatible
HDTV using an optional HDMI cable. (p.72)
2. TV turns on as soon as you press the power button is pressed on the
camera.
3. If there is no picture after the TV turns on, press the source button on
the TV remote control to change to the HDMI mode.
- Depending on the TV, it might not change to the HDMI mode even
though you press the source button.
4. When you select the camera menu of Anynet+ using the TV remote,
a play menu screen appears on the TV.
- The Playback menu appearing on TV screen operates the same
way as the Playback menu on the camera.
Ɣ Only available when using a TV that supports Anynet+ (HDMI-CEC).
(Not available when using a TV that supports only Anynet.)
Ɣ For more detailed information of the HDTV connection and
Anynet+, see the user manual of your Samsung HDTV.
5. Select the playback function you want using the remote control of the
TV.
- To select the sub menus, move to the desired playback menu and
then press the Enter button.
Back Set
AF Lamp :On
Anynet+ (HDMI-CEC) :On
HDMI Size :1080i
Video Out :NTSC
USB :Auto
Auto Power Off :3 min
Off
On