Samsung LNS4696DX-XAA - Manual (Page 49)

English-47
Setting the Film Mode
You can automatically sense and process film signals from all sources and adjust the picture for optimum quality.
1 Press the MENU button. Press the or button to select “Picture”,
then press the ENTER button.
2 Press the or button to select “Film Mode”, then press the
ENTER button.
3 Press the or button to select “Off” or “On”, then press the
ENTER button.
Select “Return” by pressing the or button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
The Film Mode can only be set when viewing an analog signal in AV modes
(AV or S-Video) that support SD (Standard Definition) signals (480i).
BN68-01047F-00Eng.qxd 7/14/06 5:18 AM Page 47