Samsung LNS4696DX-XAA - Manual (Page 87)

English-85
• Zoom(x 2): Zoom-in to the photo x2.
• Zoom(x 4): Zoom-in to the photo x4.
• Zoom(x 1): Restore the photo to its original size.
To move to pan up/down/left/right, press the , ,
and buttons.
To exit WISELINK mode, press the WISELINK button on
the remote control.
1 Complete Steps 1 to 3 of “Using the WISELINK Menu”.
(Refer to page 79)
2 Press the or button to move to “Photo”, then press the
ENTER button.
The saved file information is displayed as a folder or file.
3 Press the , , and buttons to select a file, then press the
ENTER button. Pressing the button over a photo thumbnail
displays the photo in full screen.
4 Press the INFO button to display the option (Slide Show, Rotate,
Zoom).
Press the or button to select “Zoom”, then press the
ENTER button.
The enlarged photo image appears on the screen.
To enlarge a displayed photo, press the INFO button to open the
Options window, select the “Zoom” option and press the
ENTER
button.
Whenever you do this, the following zoom options are applied
in sequence.
• The INFO button, the Rotate option and Enter must be pressed
each time you want to Zoom the picture.
For example, from x 2 to x 4.
Zooming-in
Exit
Slide Show
Rotate
Zoom
709x531
2006-1-30
1/14
continued...
BN68-01047F-00Eng.qxd 7/14/06 5:18 AM Page 85