Samsung LNS4696DX-XAA - Manual (Page 86)

English-84
1 Complete Steps 1 to 3 of “Using the WISELINK Menu”.
(Refer to page 79)
2 Press the or button to move to “Photo”, then press the
ENTER button.
The saved file information is displayed as a folder or file.
3 Press the , , and buttons to select a file, then press the
ENTER button. Pressing the button over a photo thumbnail displays
the photo in full screen.
4 Press the INFO button to display the option(Slide Show, Rotate, Zoom).
Press the or button to select “Rotate”, then press the
ENTER button.
• The INFO button, the Rotate option and Enter must be pressed each
time you want to rotate the picture.
For example, from 90 to 180 degrees.
To rotate a photo, press the INFO button to open the options window,
select the “Rotate” option and press the ENTER
button.
Whenever you do this, the photo on the screen is rotated.
(90°, 180°, 270°, 0°)
To exit WISELINK mode, press the WISELINK button on the
remote control.
The rotated file is not saved.
Zoom/Slide Show option is disabled when the Rotate option is selected.
Rotating
Exit
Slide Show
Rotate
Zoom
Rotating (90°)
Current OSD Icon Function
The Rotating function information icon (Displayed at the top left of the screen).
To rotate a photo by 90 degrees
Rotating (180°) To rotate a photo by 180 degrees
Rotating (270°) To rotate a photo by 270 degrees
Rotating (0°) To rotate a photo by original
BN68-01047F-00Eng.qxd 7/14/06 5:18 AM Page 84