Samsung SCX-8128NA-XAA - Manual (Page 161)

Supplies and accessories_ 161
Necessary precautions to take when installing
accessories
• Disconnect the power cord.
Never remove the control board cover while the power is turned on.
To avoid the possibility of an electrical shock, always disconnect the
power cord when installing or removing ANY internal or external
accessories.
• Discharge static electricity.
The control board and internal accessories (network interface card or
memory module) are sensitive to static electricity. Before installing or
removing any internal accessories, discharge static electricity from your
body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk around before
finishing the installation, repeat this procedure to discharge any static
electricity again.
• Activating the added accessories in the PS driver properties.
After installing an accessory such as an optional tray, PS driver users
must do the additional setting. Go to the PS printer properties and set
the added accesorry activated.
When installing accessories, the battery inside the machine is a
service component. Do not change it by yourself.
There is a risk of an explosion if battery is replaced by an incorrect
type. Dispose used batteries according to the instructions.
Available accessories
You can purchase and install accessories to enhance your machine’s
performance and capacity.
Accessory function Part name
Cabinet Stand You can place the
machine on the
ergonomically-designed
cabinet which lets you
reach the machine
conveniently. Also, you
can easily move the
cabinet with its wheels,
if necessary, and store
miscellaneous items
like papers into the
cabinet.
CLX-DSK20T
Dual Cassette
Feeder
If you are experiencing
frequent Paper Source
problems, you can
attach an additional
tray. The optional tray
can hold up to 1,040
sheets. You can print
documents in various
sizes and types of print
materials in the tray.
CLX-PFP100
300-Sheet Inner
Finisher
This Inner Finisher
allows you to sort,
group and staple
printouts.
CLX-FIN50S
Working Table You can place an
external authentication
device or
miscellaneous items on
the working table.
CLX-WKT000
Fax Kit This fax kit allows you
to use your machine as
a fax.
CLX-FAX160
FDI(Foreign Device
Interface)Kit
This card is installed
inside the machine to
allow a third party
device such as a coin
operated device or a
card reader. Those
devices allow the
payfor-print service on
your machine.
CLX-KIT10F
Hard Disk Kit This hard disk kit will
help the machine to be
used in various ways.
ML-HDK471
Job Separator This Job separator will
help the machine to
collate printouts.
CLX-JST100
Accessory function Part name