Samsung SCX-8128NA-XAA - Manual (Page 30)

Introduction_ 30
Control panel overview
C
ID
1
2
3 4 5
6
13
14
15
10
11 8
9
12
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
When you use the display screen, use your finger only.
Display screen Shows the current machine status and prompts during an operation. You can set menus easily using the display screen.
Status LED Shows the status of your machine (see "Understanding the status LED" on page 32).
Job Status Shows the jobs currently running, queued jobs, completed jobs, current error code or secured jobs.
Counter Shows the amount of paper used (see "Counter button" on page 35).
Eco Turn on Eco mode (see "Eco button" on page 35).
Clear Deletes characters in the edit area.
Numeric keypad
Dials numbers and enters alphanumeric characters. You can also enter the number value for document copies or other
options.
Reset Resets the current machine setup.
Redial/Pause
Redials the recently sent fax number or received caller ID in ready mode, or inserts a pause (-) into a fax number in edit
mode.
Log in/Log out Allows user to log in or log out.
On Hook Dial
When you press this button, you can hear a dial tone. Then enter a fax number. It is similar to making a call using a speaker
phone.
Power
Turns the power on or off. When the blue LED is on, the machine is powered on and you can use it. To turn the machine off,
press and hole this button for at least 3 seconds. Press Yes when the confirmation window appears.
Interrupt Stops a job in operation for urgent copying.
Stop
Stops an operation at any time. The pop-up window appears on the screen showing the current job that the user can stop or
resume.
Start Starts a job.