Samsung SCX-8128NA-XAA - Manual (Page 55)

Copying_ 55
Using special copy features
On the Advanced or Image tab of the Copy screen, you can select specific
copy features.
Selecting the size of originals
Copies can be produced after specifying the document scanning size if the
document size cannot be detected automatically or if you wish to specify a
certain document size.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Adjust the settings for each copy such as Paper Source, Duplex and
more in the Basic tab (see "Changing the settings for each copy" on
page 52).
4. Press Advanced tab > Original Size from the display screen.
5. Select the original size.
You can change the paper list on the display screen pressing Inch
Size or mm Size. The paper list is divided into the available A/B
size type and letter size type paper in this machine.
• Custom: If there is no required paper size or you need to use
custom sized paper, press the cardinal point arrows to set the
original size. You can also set and save the custom size using
Custom Size. You can then select the custom size whenever you
need it.
The custom size available is different depending on where the
originals are placed.
• Auto: Automatically detects the size of originals, but this option is
supported only when originals are A3, A4 LEF, A4 SEF, B4, B5 LEF,
B5 SEF, A5 LEF, A5 SEF, Ledger, Legal, Letter LEF, Letter SEF,
Statement LEF and Statement SEF-sized.
If you use non-standard-sized paper, image loss could occur. In this
case, you need to select the appropriate paper size before you print.
• Mixed Size: Allows the use of both of Letter and Legal-sized papers
together, and the machine uses the proper-sized paper from several
trays. For example, if the originals total 3 pages, the 1st page is
letter-sized paper, the 2nd page is legal-sized paper, and the 3rd
page is letter-sized paper, then the machine prints the output first
letter, legal, and letter in order from several trays.
Mixed Size is activated when the originals are placed in the
DADF.
• Other preset values: You can select the size of originals directly by
pressing the buttons.
6. Press OK from the display screen.
7. Press Start on the control panel to begin copying.
Selecting the orientation of originals
When copying double-sided documents or making double-sided copies or
combined copies, specify the document orientation; otherwise, the copies
may not be printed in the correct page order or correct front and back page
arrangement.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Press Advanced tab > Original Orientation from the display screen.
4. Select the orientation of the original document.
• Upright Images: Select this setting for an original document loaded
with the top toward the back of the machine.
• Sideways Images: Select this setting for an original document
loaded into the DADF with the top of the original document toward
In the DADF On the scanner glass
Minimum size 128 x 128 mm
(5 x 5 inches) 25 x 25 mm
(1.0 x 1.0 inches)
Maximum size 297 x 432 mm
(11.7 x 17.0 inches) 297 x 432 mm
(11.7 x 17.0 inches)
Using the DADF Using the scanner
glass
Icon